My stepmom suggested Rey's Jakku scavenger outfit. We walked out of our second viewing of The Force Awakens at our local single screen theatre while I was home at Christmas and the first words out of her mouth were "You should make her outfit!"

Since I've been on a bit of a princess kick, I was inclined to agree with her. Besides, it had been a while since I'd tried to make a pair of pants and Rey's staff was super cool.

Also, I found the source the film used for her boots and I am a sucker for sci-fi shoes. I actually waited long enough that the exchange rate dropped and I was able to get the boots for about $160, down from about $220. So obviously I had to make the rest of the look.

The Pants

I knew exactly how I wanted my pants to be - I all ready owned them. Actually, I owned a pair of dance pants (Ainsliewear's Best Dance Pant, in case you're interested). These are very one of the most comfortable, flexible, and softest pieces of clothing I own and when pulled to knee, fold to make a very attractive capri-length pant. I love them and I knew they would make a near perfect Rey pant. Trouble is, they are a dark charcoal grey. Goes great with leos, but not for Rey.

I patterned with newsprint over them. I traced around the seams where I could and measured the rest. Perfect as they are, the dance pant is actually remarkably simple - four pattern pieces. One back leg, one front, the waistband, and the cuff. Fantastic.

Part of the glory of the dance pant is its fabric. It's a stretch cotton jersey. I (unsurprisingly) could not find something as gloriously soft at JoAnn's, but I did come up with something close in a cream color.

I sewed most of the pant by hand. I'm rubbish at sewing stretch fabrics on traditional machines and I hadn't gotten my surger yet. The hand sew held together for the California Academy of Science's NightLife Halloween party and Halloween night, plus three dye baths and two machine washes, so I was pretty happy. I did go back over the seams though once my surger arrived, just to be sure everything held up.

I dyed the pants post-assembly - in the event I ended up hating the final color, I had enough fabric for a second pair. I bathed them first in Rit's powdered Pearl Grey dye for about fifteen total minutes, following the instructions on the dye for my fabric. While the grey alone was great, I went ahead and gave them a two additional shorter baths in Rit's liquid Taupe to add a bit of desert grime to them. The taupe ultimately was a little more patchy than I'd planned (the first taupe bath was interrupted by my puppy and I didn't get the pants submerged completely in time), but I quite like it as sort of an unintentional weathering effect.

They look a little like dingy long underwear when they aren’t pulled up to the knee, but I’m really happy with the outcome of the pants. They’re super soft and make Scavenger Outfit one of the most comfortable costumes I've ever owned.

The Top

This was an easy one.

I didn't properly pattern. I swore to myself I wouldn't do this again after my ridiculous good luck with the Elsa top and train, but I had enough of the bleached muslin to make multiple shirts and I was feeling lucky.

I measured out the length of the shirt from front to back and over the shoulder and cut this out of my muslin. I then folded my freshly cut cloth in half and used, of all things a round cork placemat to chalk out a collar in the center of the fold.

I failed to get any construction shots of the top, since the whole thing ended up only taking about an hour to complete.

I cut the collar before I draped the whole thing over my dress form. My dress form is almost exactly to my measurements and for a looser garment like Rey’s Scavenger shirt, I didn’t even need to pad up the bust where the measurements differ. I pinned along the sides and chalked out where the sleeves and the slit in the collar needed to hit.

I cut the collar slit and trimmed off the excess muslin about an inch off the pins, for seam allowance and any adjustments I might have needed to make before I pulled pinned shirt off the dress form. I laid it out flat, used the same cork round to chalk out and cut arm holes, sewed up the pinned sides and then it was back on the dress form.

I was actually pretty happy with the initial outcome and I didn’t have to do a whole lot of alterations on the top, just evened the sides out a bit. I went ahead and finished the collar with bias tape, before I moved onto the little cap sleeves.

I had two perfect half circles of muslin all ready from where I cut the arm holes. I pleated one for the texture seen in research photos and then trimmed the other before sewing them in. I did have to adjust the length of the flat sleeve a few times before I was totally happy that it was even with the pleated sleeve, but I was pleasantly surprised with how well they turned out.

The muslin wasn’t bleached totally white to start with and when paired with my finished pants, I was really pleased with their existing color. I didn’t dye them as I’d initially planned, but I did go ahead and finish off the bottom hem and I had myself most of a Jakku scavenger outfit.

Next Time: The Wraps and the Leather Pieces

Jakku Rey - Part One

Spell Eternity with Quantum Dragon Theatre!

The Elsa Dress - Part Four