The Skirt

This was the easy bit - straight forward sewing with decently cooperative fabrics.

I didn’t cut a mock-up. I rarely do for personal projects, since I left school - unless I’m working on something particularly tricky or I’ve drafted the pattern fully from scratch, I don’t find it worth the money or the fabric. I keep waiting for this strategy to come back to bite me, but so far, I’ve not had any trouble.

I used the skirt pattern from the McCall M7000 and cut the pieces in both the sateen and the glitter organza.

I overlaid them and sewed, leaving a slit to the knee in the right side seam that wasn’t mentioned in the pattern. Because the pattern called for the skirt to attached to the bodice, I left the top unfinished for a good long while with every intention to piece the two together at the end. Ultimately, the bodice was just stiff enough that it would have been unnecessarily difficult to try and get it on with the skirt attached and I had to devise my own waistband fishing. I decided on an elastic waist band with a snap. I finished with a basic rolled hem and have since gone back and cleaned up the seams with my overlock.

The Bodice

Gussets on the muslin base and the finished hem

Like the skirt, I used the McCall pattern for the bodice base and cut it in muslin. I’m sure I went wrong somewhere, though I’m still not 100% sure where, because it ended up being surprisingly large. To fix this, I removed a whole panel from the back and added in two gussets in scrap fabric to either side of the zipper so I could zip the bodice closed when I had the thing on.

It wasn’t pretty and it wasn’t the most beautifully tailored creation, but it didn’t matter, since the whole thing was going to be covered in foamies. I finished off the bottom hem with scrap skirt fabric, since there was a chance it might be seen and based both the top portion and bottom with a teal fabric paint, in case any of the muslin base might peek out from under the foamies. It turned out that the teal fabric paint was actually a glow in the dark paint and I startled myself on more than one occasion walking past the darkened living room to see the bodice glowing eerily on the dress form. I left the top hem unfinshed so that I would have something for the chiffon top to attach to and I left the zipper long, with the thought that I would attach the skirt.

Then it was time for foamies.

I cut a lot, I mean a lot of foamies. I even enlisted the help of my family to cut foamies, I needed so many. I had cut several different shape options - a mid-size rectangle, a longer, thin rectangle, a square, and a tiny rectangle - which we used as templates. We ultimately cut two full teal 12”x18” sheets of foam and one sheet of white. I can’t even being to estimate how many we finally cut, but I was very happy with the effect.

I was fairly confident that regular E6000, despite its longer tacking time, was going to be the most flexible, toughest, and yield the cleanest finish just from experience and research, but I ran a couple of tests just to be sure. Sewing the foamies left obvious nicks in the foam and hot glue was not only too stiff, but not tough enough to hold up over time.

Initially, I left the bodice on my dress form to try and hold the shape of the bodice, but the tacking time of the E6000 made the process of affixing foamies torturously slow, as each piece needed to be held onto the bodice by hand until the glue tacked up. I was a little concerned about how the the bodice shape would turn out if I laid it flat, but I decided to risk it for sake of efficiency and my own sanity. That’s when the bodice came off the dress form and I was able to speed the process up by allowing the foamies to lay flat with a weight while I kept gluing.

The E6000 was fortunately flexible enough that the flat foamie application didn’t matter - once the bodice was totally covered and back on the dress form, the foamies laid beautifully. They did look rather unfinished and flat on their own, however and that’s where the Gel Medium came in.

I had originally purchased it to experiment as an ice detail option for the shoes, but the Gel Medium gave a nice icy-looking finish, so I used it for the bodice too. I mixed in a little extra fine glitter to add a little bit of shimmer and applied the gel medium with pallet knife. In total, I put down three thin coats (an 8 oz jar and a half in total, including both the bodice and the shoe detail). Ultimately, it wasn't as flexible as I would have preferred, but it was still light and I was super happy with the overall look of the texture.

Next Time: The Train, Sleeves, and The Top

Bodice with Gel Medium. The Gel Medium takes a few days to cure completely. Here, you can see the white patches where it's still setting up.

The Elsa Dress - Part Two

The Elsa Dress - Part Three

The Elsa Dress - Part One